Readonly closedIs true after 'close' has been emitted.
v18.0.0
Is true after writable.destroy() has been called.
v8.0.0
Readonly erroredReturns error if the stream has been destroyed with an error.
v18.0.0
Readonly writableIs true if it is safe to call writable.write(), which means
the stream has not been destroyed, errored or ended.
v11.4.0
Readonly writableNumber of times writable.uncork() needs to be
called in order to fully uncork the stream.
v13.2.0, v12.16.0
Readonly writableIs true after writable.end() has been called. This property
does not indicate whether the data has been flushed, for this use writable.writableFinished instead.
v12.9.0
Readonly writableIs set to true immediately before the 'finish' event is emitted.
v12.6.0
Readonly writableReturn the value of highWaterMark passed when creating this Writable.
v9.3.0
Readonly writableThis property contains the number of bytes (or objects) in the queue
ready to be written. The value provides introspection data regarding
the status of the highWaterMark.
v9.4.0
Readonly writableIs true if the stream's buffer has been full and stream will emit 'drain'.
v15.2.0, v14.17.0
Readonly writableGetter for the property objectMode of a given Writable stream.
v12.3.0
Static Readonly captureStatic captureSets or gets the default captureRejection value for all emitters.
Static defaultStatic Readonly errorThis symbol shall be used to install a listener for only monitoring 'error'
events. Listeners installed using this symbol are called before the regular
'error' listeners are called.
Installing a listener using this symbol does not change the behavior once an
'error' event is emitted, therefore the process will still crash if no
regular 'error' listener is installed.
Optional [captureRest ...args: AnyRestOptional _constructImplementation of Writable
Optional _writevEvent emitter The defined events on documents including:
Rest ...args: any[]The writable.cork() method forces all written data to be buffered in memory.
The buffered data will be flushed when either the uncork or end methods are called.
The primary intent of writable.cork() is to accommodate a situation in which
several small chunks are written to the stream in rapid succession. Instead of
immediately forwarding them to the underlying destination, writable.cork()buffers all the chunks until writable.uncork() is called, which will pass them
all to writable._writev(), if present. This prevents a head-of-line blocking
situation where data is being buffered while waiting for the first small chunk
to be processed. However, use of writable.cork() without implementingwritable._writev() may have an adverse effect on throughput.
See also: writable.uncork(), writable._writev().
v0.11.2
Destroy the stream. Optionally emit an 'error' event, and emit a 'close'event (unless emitClose is set to false). After this call, the writable
stream has ended and subsequent calls to write() or end() will result in
an ERR_STREAM_DESTROYED error.
This is a destructive and immediate way to destroy a stream. Previous calls towrite() may not have drained, and may trigger an ERR_STREAM_DESTROYED error.
Use end() instead of destroy if data should flush before close, or wait for
the 'drain' event before destroying the stream.
Once destroy() has been called any further calls will be a no-op and no
further errors except from _destroy() may be emitted as 'error'.
Implementors should not override this method,
but instead implement writable._destroy().
Optional error: ErrorOptional, an error to emit with 'error' event.
v8.0.0
Rest ...args: any[]Calling the writable.end() method signals that no more data will be written
to the Writable. The optional chunk and encoding arguments allow one
final additional chunk of data to be written immediately before closing the
stream.
Calling the write method after calling end will raise an error.
// Write 'hello, ' and then end with 'world!'.
const fs = require('fs');
const file = fs.createWriteStream('example.txt');
file.write('hello, ');
file.end('world!');
// Writing more now is not allowed!
Optional cb: (() => void)v0.9.4
Optional cb: (() => void)Optional cb: (() => void)Returns an array listing the events for which the emitter has registered
listeners. The values in the array are strings or Symbols.
const EventEmitter = require('events');
const myEE = new EventEmitter();
myEE.on('foo', () => {});
myEE.on('bar', () => {});
const sym = Symbol('symbol');
myEE.on(sym, () => {});
console.log(myEE.eventNames());
// Prints: [ 'foo', 'bar', Symbol(symbol) ]
v6.0.0
Returns the current max listener value for the EventEmitter which is either
set by emitter.setMaxListeners(n) or defaults to defaultMaxListeners.
v1.0.0
Returns the number of listeners listening to the event named eventName.
If listener is provided, it will return how many times the listener
is found in the list of the listeners of the event.
The name of the event being listened for
Optional listener: FunctionThe event handler function
v3.2.0
Returns a copy of the array of listeners for the event named eventName.
server.on('connection', (stream) => {
console.log('someone connected!');
});
console.log(util.inspect(server.listeners('connection')));
// Prints: [ [Function] ]
v0.1.26
Alias for emitter.removeListener().
Rest ...args: any[]v10.0.0
Rest ...args: any[]Rest ...args: any[]Rest ...args: any[]Rest ...args: any[]Returns a copy of the array of listeners for the event named eventName,
including any wrappers (such as those created by .once()).
const emitter = new EventEmitter();
emitter.once('log', () => console.log('log once'));
// Returns a new Array with a function `onceWrapper` which has a property
// `listener` which contains the original listener bound above
const listeners = emitter.rawListeners('log');
const logFnWrapper = listeners[0];
// Logs "log once" to the console and does not unbind the `once` event
logFnWrapper.listener();
// Logs "log once" to the console and removes the listener
logFnWrapper();
emitter.on('log', () => console.log('log persistently'));
// Will return a new Array with a single function bound by `.on()` above
const newListeners = emitter.rawListeners('log');
// Logs "log persistently" twice
newListeners[0]();
emitter.emit('log');
v9.4.0
Removes all listeners, or those of the specified eventName.
It is bad practice to remove listeners added elsewhere in the code,
particularly when the EventEmitter instance was created by some other
component or module (e.g. sockets or file streams).
Returns a reference to the EventEmitter, so that calls can be chained.
Optional event: string | symbolv0.1.26
Rest ...args: any[]Retrieve batch result
By default EventEmitters will print a warning if more than 10 listeners are
added for a particular event. This is a useful default that helps finding
memory leaks. The emitter.setMaxListeners() method allows the limit to be
modified for this specific EventEmitter instance. The value can be set toInfinity (or 0) to indicate an unlimited number of listeners.
Returns a reference to the EventEmitter, so that calls can be chained.
v0.3.5
Promise/A+ interface Delegate to promise, return promise instance for batch result
The writable.uncork() method flushes all data buffered since cork was called.
When using writable.cork() and writable.uncork() to manage the buffering
of writes to a stream, defer calls to writable.uncork() usingprocess.nextTick(). Doing so allows batching of allwritable.write() calls that occur within a given Node.js event
loop phase.
stream.cork();
stream.write('some ');
stream.write('data ');
process.nextTick(() => stream.uncork());
If the writable.cork() method is called multiple times on a stream, the
same number of calls to writable.uncork() must be called to flush the buffered
data.
stream.cork();
stream.write('some ');
stream.cork();
stream.write('data ');
process.nextTick(() => {
stream.uncork();
// The data will not be flushed until uncork() is called a second time.
stream.uncork();
});
See also: writable.cork().
v0.11.2
The writable.write() method writes some data to the stream, and calls the
supplied callback once the data has been fully handled. If an error
occurs, the callback will be called with the error as its
first argument. The callback is called asynchronously and before 'error' is
emitted.
The return value is true if the internal buffer is less than thehighWaterMark configured when the stream was created after admitting chunk.
If false is returned, further attempts to write data to the stream should
stop until the 'drain' event is emitted.
While a stream is not draining, calls to write() will buffer chunk, and
return false. Once all currently buffered chunks are drained (accepted for
delivery by the operating system), the 'drain' event will be emitted.
Once write() returns false, do not write more chunks
until the 'drain' event is emitted. While calling write() on a stream that
is not draining is allowed, Node.js will buffer all written chunks until
maximum memory usage occurs, at which point it will abort unconditionally.
Even before it aborts, high memory usage will cause poor garbage collector
performance and high RSS (which is not typically released back to the system,
even after the memory is no longer required). Since TCP sockets may never
drain if the remote peer does not read the data, writing a socket that is
not draining may lead to a remotely exploitable vulnerability.
Writing data while the stream is not draining is particularly
problematic for a Transform, because the Transform streams are paused
by default until they are piped or a 'data' or 'readable' event handler
is added.
If the data to be written can be generated or fetched on demand, it is
recommended to encapsulate the logic into a Readable and use pipe. However, if calling write() is preferred, it is
possible to respect backpressure and avoid memory issues using the 'drain' event:
function write(data, cb) {
if (!stream.write(data)) {
stream.once('drain', cb);
} else {
process.nextTick(cb);
}
}
// Wait for cb to be called before doing any other write.
write('hello', () => {
console.log('Write completed, do more writes now.');
});
A Writable stream in object mode will always ignore the encoding argument.
Optional data to write. For streams not operating in object mode, chunk must be a string, Buffer or Uint8Array. For object mode streams, chunk may be any
JavaScript value other than null.
Optional callback: ((error) => void)Callback for when this chunk of data is flushed.
false if the stream wishes for the calling code to wait for the 'drain' event to be emitted before continuing to write additional data; otherwise true.
v0.9.4
Optional callback: ((error) => void)Static addExperimental Listens once to the abort event on the provided signal.
Listening to the abort event on abort signals is unsafe and may
lead to resource leaks since another third party with the signal can
call e.stopImmediatePropagation(). Unfortunately Node.js cannot change
this since it would violate the web standard. Additionally, the original
API makes it easy to forget to remove listeners.
This API allows safely using AbortSignals in Node.js APIs by solving these
two issues by listening to the event such that stopImmediatePropagation does
not prevent the listener from running.
Returns a disposable so that it may be unsubscribed from more easily.
import { addAbortListener } from 'node:events';
function example(signal) {
let disposable;
try {
signal.addEventListener('abort', (e) => e.stopImmediatePropagation());
disposable = addAbortListener(signal, (e) => {
// Do something when signal is aborted.
});
} finally {
disposable?.[Symbol.dispose]();
}
}
Disposable that removes the abort listener.
v18.18.0
Static fromStatic getReturns a copy of the array of listeners for the event named eventName.
For EventEmitters this behaves exactly the same as calling .listeners on
the emitter.
For EventTargets this is the only way to get the event listeners for the
event target. This is useful for debugging and diagnostic purposes.
const { getEventListeners, EventEmitter } = require('events');
{
const ee = new EventEmitter();
const listener = () => console.log('Events are fun');
ee.on('foo', listener);
getEventListeners(ee, 'foo'); // [listener]
}
{
const et = new EventTarget();
const listener = () => console.log('Events are fun');
et.addEventListener('foo', listener);
getEventListeners(et, 'foo'); // [listener]
}
v15.2.0, v14.17.0
Static getReturns the currently set max amount of listeners.
For EventEmitters this behaves exactly the same as calling .getMaxListeners on
the emitter.
For EventTargets this is the only way to get the max event listeners for the
event target. If the number of event handlers on a single EventTarget exceeds
the max set, the EventTarget will print a warning.
import { getMaxListeners, setMaxListeners, EventEmitter } from 'node:events';
{
const ee = new EventEmitter();
console.log(getMaxListeners(ee)); // 10
setMaxListeners(11, ee);
console.log(getMaxListeners(ee)); // 11
}
{
const et = new EventTarget();
console.log(getMaxListeners(et)); // 10
setMaxListeners(11, et);
console.log(getMaxListeners(et)); // 11
}
v18.17.0
Static listenerA class method that returns the number of listeners for the given eventNameregistered on the given emitter.
const { EventEmitter, listenerCount } = require('events');
const myEmitter = new EventEmitter();
myEmitter.on('event', () => {});
myEmitter.on('event', () => {});
console.log(listenerCount(myEmitter, 'event'));
// Prints: 2
The emitter to query
The event name
v0.9.12
Since v3.2.0 - Use listenerCount instead.
Static onconst { on, EventEmitter } = require('events');
(async () => {
const ee = new EventEmitter();
// Emit later on
process.nextTick(() => {
ee.emit('foo', 'bar');
ee.emit('foo', 42);
});
for await (const event of on(ee, 'foo')) {
// The execution of this inner block is synchronous and it
// processes one event at a time (even with await). Do not use
// if concurrent execution is required.
console.log(event); // prints ['bar'] [42]
}
// Unreachable here
})();
Returns an AsyncIterator that iterates eventName events. It will throw
if the EventEmitter emits 'error'. It removes all listeners when
exiting the loop. The value returned by each iteration is an array
composed of the emitted event arguments.
An AbortSignal can be used to cancel waiting on events:
const { on, EventEmitter } = require('events');
const ac = new AbortController();
(async () => {
const ee = new EventEmitter();
// Emit later on
process.nextTick(() => {
ee.emit('foo', 'bar');
ee.emit('foo', 42);
});
for await (const event of on(ee, 'foo', { signal: ac.signal })) {
// The execution of this inner block is synchronous and it
// processes one event at a time (even with await). Do not use
// if concurrent execution is required.
console.log(event); // prints ['bar'] [42]
}
// Unreachable here
})();
process.nextTick(() => ac.abort());
The name of the event being listened for
Optional options: StaticEventEmitterOptionsthat iterates eventName events emitted by the emitter
v13.6.0, v12.16.0
Static onceCreates a Promise that is fulfilled when the EventEmitter emits the given
event or that is rejected if the EventEmitter emits 'error' while waiting.
The Promise will resolve with an array of all the arguments emitted to the
given event.
This method is intentionally generic and works with the web platform EventTarget interface, which has no special'error' event
semantics and does not listen to the 'error' event.
const { once, EventEmitter } = require('events');
async function run() {
const ee = new EventEmitter();
process.nextTick(() => {
ee.emit('myevent', 42);
});
const [value] = await once(ee, 'myevent');
console.log(value);
const err = new Error('kaboom');
process.nextTick(() => {
ee.emit('error', err);
});
try {
await once(ee, 'myevent');
} catch (err) {
console.log('error happened', err);
}
}
run();
The special handling of the 'error' event is only used when events.once()is used to wait for another event. If events.once() is used to wait for the
'error' event itself, then it is treated as any other kind of event without
special handling:
const { EventEmitter, once } = require('events');
const ee = new EventEmitter();
once(ee, 'error')
.then(([err]) => console.log('ok', err.message))
.catch((err) => console.log('error', err.message));
ee.emit('error', new Error('boom'));
// Prints: ok boom
An AbortSignal can be used to cancel waiting for the event:
const { EventEmitter, once } = require('events');
const ee = new EventEmitter();
const ac = new AbortController();
async function foo(emitter, event, signal) {
try {
await once(emitter, event, { signal });
console.log('event emitted!');
} catch (error) {
if (error.name === 'AbortError') {
console.error('Waiting for the event was canceled!');
} else {
console.error('There was an error', error.message);
}
}
}
foo(ee, 'foo', ac.signal);
ac.abort(); // Abort waiting for the event
ee.emit('foo'); // Prints: Waiting for the event was canceled!
Optional options: StaticEventEmitterOptionsv11.13.0, v10.16.0
Optional options: StaticEventEmitterOptionsStatic setconst {
setMaxListeners,
EventEmitter
} = require('events');
const target = new EventTarget();
const emitter = new EventEmitter();
setMaxListeners(5, target, emitter);
Optional n: numberA non-negative number. The maximum number of listeners per EventTarget event.
Rest ...eventTargets: (EventEmitter<DefaultEventMap> | _DOMEventTarget)[]v15.4.0
Static to
Batch (extends Writable)